Accessories (PA/Monitoring Products)

XXR-*

Colored coding rings for XX Series. Insert must not be unsoldered to change the color coding.
Color coding: 0-Black, 1-Brown, 2-Red, 3-Orange, 4-Yellow, 5-Green, 6-Blue, 7-Violet, 8-Grey, 9-White

XXCR

Clear coding ring for the XX series which allows an individual customized labeling, branding, coding etc. Just place an individual coloured and or lettered paper or tape eg. Brothers inside the ring.

BXX-*

Colored bushings for XX Series.
Color coding: 0-Black, 1-Brown, 2-Red, 3-Orange, 4-Yellow, 5-Green, 6-Blue, 7-Violet, 8-Grey, 9-White

PXR-*

Colored rings with flat label surface for PX-Series.
Color coding: 1-Brown, 2-Red, 3-Orange, 4-Yellow, 5-Green, 6-Blue, 7-Violet, 8-Grey, 9-White

BPX-*

Colored boots for PX-Series
Color coding: 1-Brown, 2-Red, 3-Orange, 4-Yellow, 5-Green, 6-Blue, 7-Violet, 8-Grey, 9-White

HTXP

Hand tool for tightening the bushing of the XLR XX-series and the Plug PX-series.

HTPXS

Hand tool to hold the barrel of the PX series while the boot is tighten. With the HTXP the boot can be closed while with the HTPXS the barrel can be hold up for proper tightening.

LCR-*

Colored coding rings for right angle connector of the SPX Series.
Color coding: 2-Red, 4-Yellow, 5-Green, 6-Blue (Standard), 9-White

LRX

Right-angle SPX speakON conversion kit for easily changing the straight connector into a right-angle version without removing the cable from the insert.

NLRR

Strain relief reduction ring for NL4FX for thin loudspeaker cables with an O.D. of 5 to 8 mm for best cable retention.

BSL-WR

Weather resistant dripboot